Digital Imaging Solutions

COMPUTED RADIOGRAPHY

 

high-cap-xl

COLENT HIGH CAP XL (useable for mammography)

Rapid processing and precise image reading ideal for X-ray images including mammograms.

It enables extremely high throughput of up to approximately 87 IPs/hr and the time to display the image on the CR console is approximately 23 sec, in spite of its compactness.

Download Brochure

 

DIGITAL RADIOGRAPHY

 

colenta-dr

COLENTA DX IMAGING RETROFIT KIT

The COLENTA DX easy imaging retrofit kit (hardware/software), cost effectively converts films or CR based Radiography into high quality Digital X-Ray Imaging for general radiographic applications.

Download Brochure

 

colenta-dr

PROTEC Ease of use - Touch Series

State of the art operating concept - highest efficiency due to superior simple touch screen controls directly at the system.

The high-end models of our digital X-ray systems are now available as Touch version – a real innovation.

The integrated state-of-the-art touch control panel in the control arm uses all the advantages of digital technology, especially supported by the “CONAXX Touch” control and acquisition software. The operation for the user is very much simplified by ideal workflow, simple handling, and the selection of the patient at the X-ray system directly.

The integrated touch-screen is also enhancing all the advantages of the CONAXX patient positioning assistant. Furthermore the user has access to all patient relevant information directly at the x-ray system.

As a matter of course, generator control, patient selection, and job selection can be made directly at the system. Therefore, the X-ray room has to be left only for initiating the exposure.

The user gets a first impression of the image quality through CONAXX preview at the X-ray unit and if necessary, a second exposure can be made immediately. After the image has been sent for viewing, the patient overview is available again.

The position of the X-ray unit can be adjusted easily with ergonomically located buttons on the control panel.

 

PROTEC-PRS-500-DR-F-CLASSIC--PRS-500-DR-F-TOUCH

PROTEC PRS 500-DR F CLASSIC & PRS 500-DR F TOUCH

Radiography system with Bucky table and grid wall stand for digital radiology.

The X-ray system PRS 500 F series offers an effective and complete workplace to the user and a comfortable atmosphere to the patient. The system supports all radiographic techniques of the areas of orthopedics, surgery, and urology.

The X-ray unit comes with a microprocessor-controlled converter-generator of the PROVARIO HF series which is installed under the table. A digital automatic exposure control (AEC) and anatomical programming (APR) serve a smooth and fast workflow.

The PRS 500 F classic series offers almost unlimited possibilities to satisfy even most demanding customer requirements, due to its very broad application range, e.g. cassette based film-/ imaging plate system or in combination with a flat panel detector (stationary, portable, cable connected or wireless) up to a dual panel system.

PRS 500-DR F classic – digital solution with detector bucky fitting to the chosen flat panel and fixed table/ wall stand.

PRS 500-DR F Touch – digital high-end solution with integrated image acquisition through touch-display with detector-Bucky corresponding to chosen flat panel.

 

colenta-dr

PRS 500 X series

X-ray system for maximum versatility and application variety - can be combined with the tables of the Prognost XP series.

The PRS 500 X series is particularly designed for pulmonologists and all those practitioners and hospitals taking exposures with patients in standing position. These users obtain a powerful x-ray workplace with minimum space requirements.

The PRS 500 XPE version is based on the PRS 500 X model, but combined with the height adjustable PROGNOST XPE mobile Bucky table including a sophisticated synchronisation of the Bucky position with the X-ray tube stand. Special pivots enable a precise, simple and steady interlock of the table.

The PRS 500 X series comes with a PROVARIO HF x-ray generator, a digital automatic exposure control (AEC) and anatomical programming (APR). Optionally, an extended floor-rail is available for special applications, such as stitching exposures, or examinations where a three meter source to image-reception distance (SID) is required.

Due to its extremely broad application range, the PRS 500 X series offers almost unlimited possibilities to satisfy even most demanding customer requirements. Be it mere wall stand examinations, long-distance exposures, exposures with patients in standing and sitting position, exposures on-load or with image receptor put “table top”. Or be it examinations with patients lying on table - there is hardly any application that cannot be performed.

 

Swiveling-arm-system---PEDS-600

Swiveling arm system - PEDS 600

U-arm radiography system for analog and digital radiology - in combination with a table of the XP series the ideal solution.

The PEDS 600 is a state-of-the-art radiography system including a microprocessor controlled inverter generatorfrom our PROVARIO HF series. Due to the compact design the system is ideal for any kind of examination techniques in orthopedic, surgical and traumatology applications where minimum space required is of vital importance. To ensure a fast workflow the digital automatic exposure control (AEC) and anatomical programmer (APR) are part of the package.

According to individual user requirements, the PEDS 600 can be customized as an analog cassette-based system or a fully digital DR-unit. In case of a DR-configuration, the U-arm stand will be equipped with a PROTEC RAPIXX flatpanel detector. By using the CONAXX image acquisition software from PROTEC, all advantages of latest digital technology are realized to full extend: Optimal workflow along with centralized control of the X-ray generator and the detector by CONAXX provide diagnosable x-ray exposures of outstanding quality within a few seconds.

The system is available with different PROTEC RAPIXXflatpanel versions and can, due to its modular set-up, also be upgraded individually with additional software options up to a PACS (e.g. PROPAXX ).

 

PROSLIDE-32-DR-TOUCH

PROSLIDE 32-DR TOUCH

 

 

 

 

 

VIDAR MEDICAL FILM DIGITIZER

 

high-cap-x

Diagnostic PRO Advantage

VIDAR's Diagnostic PRO Advantage film digitizer has achiver the highest reliability, image quality, consistency, and best overall productivity of any digitizer on the market. In addition to typical PACS applications, the Diagnostic PRO Advantage offers flexibility - it can be used in facilities that now or in the future will support digitization of mammography priors. If you have a room supporting PACS and low-volume mammography applications, the 44-micron spot size OD Diagnostic PRO Advantage will be key in the digital transition.

Download Brochure

 

high-cap-x

Diagnostic PRO Edge

VIDAR's DiagnosticPRO® Edge film digitizer takes the highest reliability, image quality and consistency of any digitizer on the market to the next level of performance. At double the scanning speed it allows for more studies in half the time. With its DUAL USE function, DiagnosticPRO Edge offers all-in-one flexibility – in addition to PACS it can be used in facilities that now or in the future will support digitization of mammography priors. If you have a file room supporting PACS and low-volume mammography applications, the 44-micron spot size and 4.0 OD DiagnosticPRO Advantage will be key in the digital transition.

Download Brochure

 

high-cap-x

SIERRA Advantage

VIDAR's DiagnosticPRO® Edge film digitizer takes the highest reliability, image quality and consistency of any digitizer on the market to the next level of performance. At double the scanning speed it allows for more studies in half the time. With its DUAL USE function, DiagnosticPRO Edge offers all-in-one flexibility – in addition to PACS it can be used in facilities that now or in the future will support digitization of mammography priors. If you have a file room supporting PACS and low-volume mammography applications, the 44-micron spot size and 4.0 OD DiagnosticPRO Advantage will be key in the digital transition.

Download Brochure

 

Dosimetry-PRO-Advantage

Dosimetry PRO Advantage

VIDAR's DosimetryPRO® Advantage (Red) offers the radiation therapy market a specifically developed digitizer that meets the specific needs for those using popular standard film such as Carestream's Kodak EDR2 and film chemistry, as well as for those who use International Specialty Products' GAFCHROMIC EBT Film.

The DosimetryPRO Advantage for Film Dosimetry, QA and IMRT allows radiation physicists and oncologists to measure the consistency and precision of treatment beams they need for cancer therapy. The fast growing use of radiochromic film in Film Dosimetry, QA and IMRT has increased the need for an accurate medical-grade device that utilizes red-spectrum light. With the industry moving to eliminate film chemistry from modern cancer centers, VIDAR's state-of-the-art DosimetryPRO Advantage (Red) was designed to meet the exacting needs for using radiochromic film in beam analysis and related applications.

Download Brochure

 

CAD-PRO-Advantage

CAD PRO Advantage

The CAD PRO® Advantage film digitizer is specifically designed for mammography CAD. CAD systems incorporate advanced pattern recognition and image analysis, requiring a film digitizer that meets the highest standards of image quality and reliability. These advanced systems enable radiologists to improve their ability to detect early stage cancers in an efficient manner. The CAD PROAdvantage is an ideal fit for mammography facilities transitioning to digital technology.

In order to read a new mammography study, Radiologists and mammographers may require up to two years of prior studies. The ongoing transition to digital technology in mammography has forced radiologists to view both film-based priors and new digital images for the same returning patient read, until now.

Download Brochure

 

Clinical-Express-DICOM-Software

Clinical Express DICOM Software

Integrating prior studies and outside facilities...

If you need to access prior studies, access studies from outside facilities, connect a remote site, or make digital copies of films for the patient to take to another facility, VIDAR's ClinicalExpress for general radiography and mammography is the solution for you.

ClinicalExpress is designed for ease of operation and was developed specifically for use with the world's leading line of film digitizers — VIDAR's DiagnosticPRO Advantage, CAD PROAdvantage,and SIERRA Advantage. This software complies with the Digital Imaging and Communications in Medicine (DICOM) 3.0 standard to digitize relevant prior films and send the images to DICOM PACS or workstations; and allows you to easily connect outlying clinics, departments, film libraries, or your reading or treatment facilities. Alternatively, a user-friendly film digitizing station can be used to digitize film-based prior studies, including mammography. The DICOM image files can then be sent to PACS, exported to CD, or used to print hard copy duplicates without the need for film-processing chemicals.

Download Brochure